#ARDUINO CAMERA WITH OSD HOW TO#

Return: Allows the user to exit the OSD menu or return to previous screens.Sets privacy settings, motion detection, shading, color bards, and lens adjustments. Special: Controls system settings related to display output, color space CVBS, etc.Image: Sets sharpness, color gain, and display output settings for the camera.Day & Night: Sets preset day and night delays for the camera.DNR: Sets the noise reduction settings for the camera.Backlight: Sets backlight settings for the camera.White Bal: Regulates preset color temperatures for the camera.Try a few options until youвЂ™re satisfied with the picture. Exposure: Sets how light or dark the image will appear.Lens: Sets the levels and mode of the lens such as deblur and normal.The OSD menu will appear:Д«elow is a brief description of each feature located in the OSD menu: To access the OSD menu for your camera, press the menu (1) button and hold for 3 seconds. OSD stands for On-Screen Display which is an easy way to access the cameraвЂ™s internal settings. OSD Menu functions on an HD analog camera Simply arrange the pins according to the label and you can set the camera to HD-CVI, HD-TVI, AHD, or analog Other types of cameras may have a different kind of toggle, like the one shown below which still works on the same logic. If you see something like that, switch the camera to the right mode. If thereвЂ™s a signal mismatch such as a CVI camera on a TVI DVR, the picture will be black and white with huge lines rolling on the screen. If itвЂ™s a CVI, switch the camera to the CVI mode. Just make sure what kind of signal your DVR supports, letвЂ™s say it supports the TVI mode, then you switch the camera signal to TVI and the picture will show up. To switch to AHD or analog, press and hold the menu (1) button and move the switch to the right (4). To switch to TVI mode, press and hold the menu (1) and move the switch to the left (3). To switch the camera to CVI mode, press and hold the menu (1) button and move the switch upward (2). This all-in-one HD analog camera can be switched between HD-TVI, HD-CVI, AHD, and Analog modes (CVBS), depending on the device it is hooked up to, using the toggle switch.

#ARDUINO CAMERA WITH OSD HOW TO#

This guide shows how to use the toggle and explains the menu entries and various options. Attached to these type of cameras are an instructional set highlighting the basic uses of the toggle switch such as switching between the signal types. OSD stands for On Screen Display and basically comprises the internal settings of the camera. This toggle switch is used to access the OSD menu as well as manually control and switch between different modes on your camera. Many 4 in 1 HD analog cameras such as HD-TVI, HD-CVI or AHD come equipped with a toggle switch.

Arduino camera with osd